#Product Trends

New Seepex pump for the battery industry

Seepex’s new BF range of pumps kas been tailored to the needs of the growing battery production industry.

The gigafactories being built around the world to meet the huge demand for lithium-ion batteries in the automotive, electronics and semiconductor industries require a large number of pumps.

In battery production, chemical resistance and chemically compatible materials are required to avoid contamination of valuable raw materials. During the critical process of formulation, continuity and high repeatability are essential. Contamination-free pumps are also needed for smooth operation. The coating process plays another important role, as the pump has a direct impact on product quality by minimizing variations in coating thickness.

The Seepex BF pump is precisely tailored to these requirements; ensuring safety, cleanliness, high product quality and cost efficiency. The maintenance-friendly design reduces downtime and the total cost of ownership (TCO). The clamp connections for quick installation/removal and the removable rotating unit simplify replacement and maintenance work. With proper maintenance the robust pump has a long product life.

The Seepex BF pump can be installed quickly, has a flow rate of up to 30 m³/h and operates at a pressure of up to 12 bar. It is available in block or bare shaft design and can meet customer-specific drive requirements. A TA-Luft or ATEX certified version is also available.

“Operational safety and maximum cleanliness when using valuable dispersed raw materials were the driving forces behind the development of the BF range,” says Thomas Dufner, Battery Market Manager at Seepex. “It helps reduce total cost of ownership and improve energy efficiency in virtually all battery applications by eliminating contamination and being easy to maintain. Cleaning cycle failures and disposal of contaminated battery compounds are not only wasteful, but also very costly.”

“Chemical resistance and chemically compatible materials are necessary to prevent contamination of expensive raw materials,” added Dufner. “With BF, we assure that the materials are chemically compatible. The stainless steel design and flexible titanium shaft ensure contamination-free product quality. Contamination by oil or grease is impossible. The pumps can be thoroughly cleaned with common solvents and deionized water.”

Battery compounds, from lithium to electrolyte, can be added to the mixing process in precise, drop-by-drop doses. Continuity and high repeatability are critical during the formulation process. In the coating process, the pump has a direct impact on product quality by minimizing variations in coating thickness. The BF range achieves this continuity and high repeatability by using the Seepex progressive cavity pump principle with the advantage of extremely low pulsation. This ensures the highest dosing accuracy, resulting in better coating results and more accurate slurry recipes.

Seepex progressive cavity pumps, with their special design, have no spillage or leakage due to their high degree of sealability. In addition, a wide range of seals is available for different battery compounds.

Seepex, which is part of the Ingersoll Rand Group, produces its battery pumps in Shanghai, China and Bottrop, Germany in order to be able to offer large quantities with short delivery times.

#Product Trends

New Cat® heavy electric truck ‘pays for itself

Not just a great forklift but a money-saving, productivity-boosting and profit-increasing investment. That’s how Cat® Lift Trucks describes its new heavy electric counterbalance range.

The 6.0 to 12.0 tonne Cat® EP60-120N(H) range has been launched with a focus on ‘improvement that pays for itself’. Its operating economy, productive performance and driver-empowering qualities are especially emphasised.

Save money with the 6.0 to 12.0 tonne Cat® EP60-120N(H) range

The new truck’s efficient electrical systems and large battery capacities enable economical energy use and long runtimes. For easy lateral exchanging, the 96V batteries are divided into two parts. These can be removed and replaced by one person, using a power pallet or another forklift.

Quick engineer access and diagnostic aids speed up servicing and reduce the related downtime and labour costs. Robust construction, together with effective sealing and protection of key components, further reduces maintenance needs and expense. It also ensures dependable operation, however harsh the conditions. In the long term, this inbuilt durability extends the truck’s life and maximises its residual value.

Boost your output

Advanced electric motor technology generates plenty of power and speed for demanding tasks. Better still, the high torque, acceleration and lifting strength it produces are precisely controlled. As a result, every driving and load handling action is rapid, accurate and smooth.

High-positioned mast tilt cylinders enhance stability and residual lifting capacity. Meanwhile, a compact truck design, responsive steering and intelligent curve control allow fast but safe and precise manoeuvring. For workplaces with restricted height, like containers, all models have the option of a low overhead guard.

For maximum agility, NH (high-performance) models feature a +100⁰ steering axle. With this, the truck can turn on the spot within its own dimensions. It can also make instant side turns with no need for initial backward movement.

Get the best out of your drivers

Comfortable and enjoyable working conditions are a key to optimising drivers’ performance. One of the first things they notice about this truck is its low seating position compared to other large electrics. This means much less climbing for those who have to leave and re-enter the cab frequently.

The spacious operating compartment is rubber-mounted to minimise vibration and noise. Quiet hydraulic pumps, drive units and controllers also help to maintain a pleasant work environment. A high-comfort, fully adjustable seat and ergonomic controls contribute further to avoiding tiredness, fatigue, stress and strain. This is important in preventing job-related illnesses, absences, and slowdowns in work rate, which are costly to businesses.

A fundamental factor in work speed, accuracy and safety is clear vision. The new truck has been designed with good all-round views and even has a rear-view camera fitted as standard. Make your choice There are 15 models, with 7 capacities ranging from 6.0 to 12.0 tonnes. They include standard (N) and high-performance (NH) model choices at each capacity. (Except for 12.0 tonnes, at which only NH is offered.) Many optional extras are available to meet specific application needs and preferences.

Further information on Cat forklifts, warehouse equipment and related services can be found at www.catlifttruck.com. See them in action via https://www.catlifttruck.com/videos and follow the news on LinkedIn, Facebook and Twitter.

More information

#Product Trends

Mitsui Seiki’s Compact VMC Offers High-Precision Milling

The VL30 series is designed to machines high-precision mold inserts for medical, packaging, industrial and aerospace applications.

Mitsui Seiki’s VL30 Series high-speed vertical machining centers were developed for high-speed, high-precision hard milling of mold components, as well as graphite and copper tungsten electrodes. The VL30 Series features high-thrust, high-efficiency linear motor drives for the X-, Y- and Z-axes for machining hardened tool-steel alloy components. The five-axis versions use direct-drive rotary axes for smooth and controlled complex contouring. Delivering up to 1,574 ipm cutting feed rate with 1G acceleration/deceleration, it provides superior speed and motion control in high-speed point milling in multiaxis contouring applications. For accuracy, the precision glass-scale feedback system detects 0.1 μm increments.

The VL30 line is designed to machines high-precision mold inserts for medical, packaging, industrial and aerospace applications. The machine’s upgraded offerings include advanced features for process automation, workpiece and tool handling, and the latest FANUC 31i-B with i-HMI operator interface provides improved output. The latest Graphite Package option enables customers to machine completely dry with no risk of electrode contamination or premature machine wear. All versions enable simple integration with robotics and in-process part inspection.

Available in three models — the VL 30-5X five-axis machining center, as well as the VL 30 and larger VL 50 three-axis versions — this series features a 15-hp, 50,000-rpm spindle accepting HSK E25 tooling for precise roughing and ultra-fine finishing. An integrated tool changer holds up to 90 tools.

Specifications include 7.9″ × 11.8″ × 7.9″ X-, Y- and Z-axis travels, a 11.8″ × 15.8″ table size and a compact 53″ × 128″ footprint.

Enhanced production features include a four-point leveling bed, specialized main components, hand-scraped castings for excellent machine geometry and superior chip and dust evacuation.

在北京时间8月23日的新闻中，前金州勇士队球员奎因-库克在《Jefe Island》节目中回顾了2019年的NBA总决赛。

库克表示：“如果KD没有受伤，我们会赢的，他在G5的复出是我经历过最疯狂的事之一。KD爱篮球，他每一天训练两次，就是为了复出。

“我们不知道他G5会不会打，当他上场时，我们感觉大兄弟回来了，当时我们1-3落后。你能看到他上场后的影响力，他都一个多月没打球了，他第一球就是空心。”

2019年总决赛，勇士2比4不敌猛龙无缘卫冕，KD第5场曾短暂复出，但在那场比赛中再次受伤，遭遇了跟腱撕裂。

布莱斯-詹姆斯，勒布朗-詹姆斯的二儿子，在最近的一次采访中分享了他心目中的历史前五球员名单。有趣的是，他将勒布朗-詹姆斯置于榜首，甚至排在了篮球传奇迈克尔-乔丹之前。

布莱斯心中历史前五人：

勒布朗-詹姆斯

迈克尔-乔丹

科比-布莱恩特

拉塞尔-威斯布鲁克

卡梅隆-安东尼

BETHESDA, MD., January 2019 — The call came in late October 2018 during an after-hours brainstorming session at Xometry. Seeing that the number was from Culver City, California, Vice President of Growth Marketing Aaron Lichtig told fellow colleagues, "I gotta take this call." From inside the meeting room, Bill Cronin, Chief Revenue Officer, and Danny Chang, Vice President of Relationship Marketing, heard him say, "I've been waiting for this call my whole life."

Aaron broke it to colleagues that, no, he was not being recruited elsewhere, and yes, he would appear on the long-running quiz show Jeopardy! To prepare, Aaron began strategically quizzing himself with the help of questions from the Jeopardy! archives and sought out advice from past Jeopardy! winners. He also watched shows and studied specific categories he perceived as his weak spots: literature and movies. "You've heard it in the office," Aaron tells me, when we sit down to discuss the experience. "Everyone makes fun of me because I don't watch a lot of movies."

On Nov. 27, Aaron flew out to Culver City, California to prepare for his taping on Nov. 28. Once at Sony Pictures Studios, Aaron and about a dozen other contestants, including the defending champion and alternates, got ready to compete. When asked about the high number of contestants Aaron explained that they film five episodes in one day.

After arriving at Stage 10, Aaron and his fellow contestants were coached on show rules, went over gameplay, and were styled by production staff. "They put a lot of makeup on us because many people have HDTVs now and you can see everything." The contestants were then led out to the stage where they took headshots and filmed their "Hometown Howdies." 

Then they got to work practicing playing the game, and most importantly, learning how to push the buzzer at the right moment. "Using the buzzer is difficult, even for the best players, because it's a lock-out system." He tells me that once the host finishes reading a question, a light goes on. A contestant can buzz in once the light is on, but if they buzz in before the light goes on, they are locked out for a short period of time. If this happens, the other contestants have a chance to buzz in.

"Even if you know the answer, the odds are that at least one of your competitors knows, too. Getting the timing right on the buzzer is a big part of the game."

During pre-filming time, Aaron also had the opportunity to talk to fellow contestants. "They were a fun and interesting group of people, and I still keep in touch with a number of them." He discussed their qualifications with me as well: "You're playing against people who are really good. Everyone has made it through the audition.”

The audition Aaron mentions is one part of Jeopardy!'s multi-step tryout process. Since 2006, the entry point for Jeopardy! has been a 50-question online test announced just once or twice a year. After the test, contestants may be invited to audition in person for the show, where they take a second test, participate in a personality interview, and play a practice game.

Aaron has been taking the test on and off since they began offering it. In 2010, he was called to audition in person in Chicago but did not make it onto the show. "I was living in Cincinnati, Ohio, at the time, so I drove five hours to get there on a Wednesday night [after work] and auditioned Thursday morning."

Aaron kept taking the test between 2012 and 2018. Then, in February 2018, he got an email inviting him to an audition at the W Hotel in Washington, DC, on a Saturday—only a 25-minute metro ride for the Silver Spring, Maryland, resident. From there, he auditioned and was told, along with all of the other potential contestants, that he could get a call within 18 months inviting him to the show. "They told us to watch for a call from Culver City, California."

Aaron tells me his experience meeting the famed host Alex Trebek was short but sweet. "The first time you really get to talk to him is when you answer your first question." Aaron also witnessed Alex Trebek pivoting on a dime and fielding questions from the audience. "He's so quick on his feet. He has that really calm, grandfatherly way of talking. Very soothing. And he doesn't look a day older than he did 20 years ago. I don't know what he does, but he looks good."

Courtesy ofJeopardy! Productions, Inc.

He adds, "The whole experience of meeting him was very surreal. You've heard him asking questions on television since you were a little kid and then all of a sudden, you're up there and he's asking them to you.”

Before the show airs, Aaron isn't allowed to divulge any of the results. When asked whether or not his colleagues at Xometry would be seeing him in multiple episodes, he said, "You’ll have to watch and see.”

To watch Aaron’s Jeopardy! debut on Thursday, January 24th, click here to find out at what time Jeopardy! airs in your local market.

Serena NgohI write about Xometry and all things manufacturing. You might also see me hosting webinars, designing infographics, producing videos, and working directly with customers to tell their manufacturing success stories.

Read more articles by Serena Ngoh

每个女生都拥有一个自己的钱包，越来越发现生活中已经不能没有他的存在，早上去上床时，出门去逛街时，还有约好了几个朋友去打麻将时，绝对不能落下的就是那款钱包，生活中会有许多人都相信运气这么回事，好的运气会带来好的收获，心情也会随之变得美好，而此时你正需要的是一款钱包。

同样是一款钱包，色彩就能起到最好的效果，另人一见钟情！最早的皮质工艺出现的钱包只有一种颜色，就与那时候的汽车一样只有黑色，不过后来人们越来越青睐有不同色彩的选择，到第一款有色彩的钱包出现，带给人们生活中美好的心情，在春暖花开的季节，你手中的钱包也随之而感染，边得色彩斑斓起来。

人们对钱包的定义已经不是那么单一，他可以容得下你更多的好心情，运气，财气，在钱包外貌与内在都用更新的认识，你可以随时随地百变造型，你可以把他拿在手走行走，当做手拿包出入于朋友聚会等场合，轻便而合理的设计，还有放下更多张生活中用到的卡位，不同内容的大钞夹层，使你的生活更加得力。

与其叫他是钱包会有点俗气，不如就改做手中的伴侣吧，粉嫩的色彩，实在另女生们难以抗拒，le boy chanel系列风格个性复古，以甜美的色彩

On December 3, 2019, Xometry, the largest marketplace for on-demand manufacturing, announced the acquisition of Munich-based Shift, the largest on-demand manufacturing marketplace in Europe. Through the acquisition, Xometry will accelerate its international expansion into 12 new countries, leveraging a worldwide network of over 4,000 manufacturers.

“Global expansion is a key step for us,” said Xometry CEO Randy Altschuler. “Many of our customers, like BMW and Bosch, have a global presence and we can serve more of their needs with a global network. Our AI-driven algorithms and intelligent sourcing platform give us a competitive advantage as we expand across new geographies and manufacturing technologies.”

“We are thrilled to join the Xometry team,” said Albert Belousov, Shift co-founder and Managing Director of Xometry Europe. “Our customers and suppliers will benefit from us joining forces with Xometry.”

Dmitry Kafidov, Shift co-founder and Managing Director of Xometry Europe, agreed. He said, “We’re eager to leverage Xometry’s technology to continue to scale our business in Europe. We look forward to providing our customers with additional manufacturing capabilities, including additive manufacturing and injection molding.”

Shift co-founder and Head of Technology for Xometry Europe Alexander Belskiy noted, “There are huge opportunities in enabling Xometry’s Instant Quote Engine and other product features in the European market.”

Shift has built the largest On-Demand manufacturing network in Europe and a customer base that includes some of the leading manufacturing companies in Europe. Shift will operate as Xometry Europe and continue to be headquartered in Munich, Germany.

Shift’s lead investors include Cherry Ventures who will become investors in Xometry. Christian Meermann, Founding Partner, Cherry Ventures stated, “The custom manufacturing industry is a massive global market of over $100 billion. We’re excited for Shift to utilize Xometry’s industry-leading technology as well as leverage the global manufacturing expertise from other Xometry investors, including BMW i Ventures and Robert Bosch Venture Capital.”

Xometry has raised $118 million since it was founded in 2013. Over the past two years, the company has grown from 100 employees to over 300 while more than doubling revenue each year.

William KruegerAs a digital marketing specialist, William works with all forms of media from photography and video to content writing and graphic design to tell the story of American manufacturing. He holds a B.A. in Communication from Wittenberg University.

Read more articles by William Krueger

The high-grade wooden boards are heavy and stable, and the imported jute ropes are selected for solid texture, wear resistance, thick and steady, not easy to shake, not easy to deform, and not easy to mildew.

minimalist cat tree
It’s a toy and it’s furniture

Strict product standards
Passed multiple inspection standards

fat cat challenge
Steady and Dangdang

Original oak
Strong load-bearing capacity

full curve cutting
Sleek and bump-proof, pure and versatile

Subtract furniture
add space

Comfort and appearance coexist

fenced cat nest
Enlarged disc, two-way fence, high security.

transparent space capsule
Increased size, high-strength frame, load-bearing up to 20kg or more.

Soft and comfortable hammock
It feels soft and delicate, enriching the cat’s adventurous personality.

Large space cat nest
A large cat nest made of thick solid wood, where cats can play happily.

Product parameters

• Product material: high-grade wooden board
• Dimensions: 80 x 40 x 143cm
• The dimensions are all measured by hand, there may be slight errors, please refer to the actual product.
• Please measure the required dimensions clearly. Reasons for exchange, return or refund due to inconsistent dimensions after purchase will not be accepted.
• Since the dimensions are all measured by hand, there may be slight errors. Please refer to the actual product.
• Made in China, or containing simplified Chinese packaging and instructions
• In case of any dispute, Pets Thing reserves the right of final decision.

Mutian ginseng catnip makes cats relax and relieve stress when they play. The noise is specially made to make it more attractive than toys when cats are playing. A more comfortable toy than a cat, happy to play with.

Wooden ginseng catnip
Let cats relax and relieve stress when they play.

Finger snapping attracts cats to play
The noise is specially made to make it more attractive than toys when cats are playing.

soft and comfortable
A more comfortable toy than a cat, happy to play with.

Product parameters

• Material: Cotton, Rayon, Polyester, Polypropylene
• Dimensions: 10x2cm
• based on The size is all measured by hand, there may be slight errors, please refer to the actual product
• Made in China, or contain simplified Chinese packaging and instructions