Category: News

What do men like? I know that sounds like the name of a romantic comedy but trust me, it’s a question a lot of women ask themselves when thinking of what birthday gifts to get for the men in their lives. If they asked me I would tell them to buy some gift cards for those men’s birthdays. Read on to see why.

Buying gifts for men can be stressful because even men are not really sure of what kind of gifts they want. However, one thing men know is the brands they like. E.g, if a guy is a Nike sneakers fan, it will be evident from the kind of shoes he wears. This is one way to figure out what to get for him but the thing is, even if you know the brand you aren’t sure of which one he will like. E.g say you want to get a pair of sneakers for the Nike lover, you need to be sure which one he is presently drooling over. Get him the wrong one and watch your gift tossed aside forever. But hey, there is light in the middle of the tunnel. That light is gift cards.

With gift cards, the male cardholder can choose what he wants by himself. For example, back to the Nike lover; imagine you give such a man a Nike gift card. You would make his day cause he will buy the exact sneakers he has been drooling over. 

Gift cards are more effective gift options for men’s birthdays and in this article, we aim to prove it. But first of all, what are gift cards?

What Are Gift Cards?

They are used to make payments in issuer’s stores. the prepaid cards are always loaded with a specific amount of money and once the money is exhausted the gift card won’t be useable again. They come in the following forms: Physical gift cards, eGift cards, Open-loop and Closed-loop gift cards.

• Physical Gift Cards

Physical gift cards are the types of gift cards you buy from over the counter in a store or can be delivered to you at home. They are usually plastic in nature and come with a gift card number and pin written on them.

• eGift Cards

eGift cards, electronic gift cards, virtual gift cards or digital gift cards all mean the same thing. An electronic gift card is basically a gift card that exists in a digital form.

• Open-Loop Gift Cards

Open-loop gift cards are the type of gift card that can be used in any store where the issuers debit/credit cards are accepted. E.g Visa gift cards and American Express gift cards.

• Closed-Loop Gift Cards

Closed-loop gift cards are the opposite of open-loop gift cards as they are only usable in the issuer’s stores or affiliate stores. E.g footlocker and Amazon gift cards.

Why Gift Cards Are Better Men’s Birthday Gifts for Men than Regular Gifts

Giving Men gift cards over regular gifts on their birthday has its own unique advantages. Here are a few of those advantages:

• It Eases the Givers Stress

With gift cards the gift giver no longer has to stress about gifts to get, they can sit down in the comfort of their houses and buy and send an eGift card to the birthday boy.

• Puts The Purchase Power in The Man’s Hands

This is a major uniqueness that gift cards have over regular gifts. The “what ifs” make giving a physical gift risky, like “what if he doesn’t like it?” or “what if it’s not his size?” To avoid the “what ifs” you should lean towards the gift card route and you will never go wrong.

• eGift cards enable quick delivery/safety 

When you send an eGift card it only takes a few minutes to deliver in the recipient’s email. Unlike regular gifts that need to be delivered physically. This will come in handy on those days you forget about his birthday throughout the day but remembered at the last minute.

• It Creates a Lasting Memory

When the cardholder buys whatever he really wants with the gift card it will leave a lasting memory in his subconscious.  

What are Gift Cards Used For?

They are used for the following:

• Gift Cards are Used as Gifts 

Gift cards are basically gifts. They were primarily made to help gift-givers be more precise with the type of gifts they give.

• It is a Form of Payment 

Forgot your debit card at home and you need to make payment and you have no cash? If you have a gift card that is accepted in the merchant’s store then you can use it as a means of payment.

• They can be Sold For Cash or Cryptocurrency

Gift cards can be sold for cash or crypto in a situation where the card owner doesn’t want to use them again. But the thing is, you can’t sell them back to the original sellers as they are not refundable once purchased. Where you can sell them is on gift card trading platforms like Prestmit.com or the Prestmit app. On the platform, you can sell them for Naira, Cedis, bitcoin, USDT and a few more cryptocurrencies.

• They are Also a Good means of Storing Money

When you want to store up money in smaller quantities but do not want to store this in a bank because it is for the near future, you can change the cash to gift cards and keep them till you need it. 

Now that we know what gift cards are and what they can be used for, what are the best gift cards for men’s birthdays?

Best Gift Cards for Men on their Birthday

Thinking of what gift cards get the men in your life? Here are a few brands of gift cards that will satisfy them depending on their preference:

1. Amazon 
2. Footlocker 
3. Nike
4. Levi’s
5. Visa gift cards
6. American Express gift cards
7. Mastercard gift cards
8. GameStop
9. BestBuy
10. J.Crew
11. Nordstrom 
12. Lowe’s
13. Airbnb
14. Birchbox Grooming
15. Lululemon

So there you have it, the best brands of gift cards for men on their birthdays. Now you don’t have to be stuck trying to answer the hard to answer the question “what do men like?” You have 15 gift cards to pick from to help you say happy birthday to them. So get on board and surprise them with a gift card or two.

 

Click:Solution to the drum problem of high speed printing press

There are proper ways to redeem and use a gift card. Not using them the right way causes errors, and this applies to all gift cards, including Footlocker gift cards. Inappropriate use or common mistakes with the card give rise to common Footlocker gift card errors.

A Footlocker gift card is a gift card issued by Footlocker, which is a popular American athletic retailer that is in the business of the production and sale of sportswear, footwear, accessories, and other apparel. You can buy both Footlocker products and other brands’ products in the Footlocker store.

Therefore, you can use Footlocker gift cards to buy your preferred products at the Footlocker store (at discounted prices) because the gift card increases the purchasing power of Footlocker customers and which in turn, enables them to buy products in the store at any time. This does not rule out the option to sell Footlocker gift cards for cash if you so wish.

A Footlocker gift card has the potential to improve the buyer behaviour of the teeming customers on the Footlocker store. Some of the importance of Footlocker gift cards in retail shopping are:

• Convenient shopping from anywhere in the world
• Footlocker gift cards serve as a payment method on Footlocker store
• Save more money while shopping

We cannot overemphasise the relevance of Footlocker gift cards to retail shopping but be that as it may, it is important to understand common Footlocker gift card errors and possible solutions to these common issues.

Common Footlocker Gift Card Errors

1. Invalid Gift Card Number

Footlocker gift cards (both physical and e-gift cards) have a 16-digit card number and an 8-digit PIN at the back of the card. You must enter the 16-digit card number before you can redeem the gift card. But you may encounter an “invalid gift card number” error if you make a mistake with any of the digits.

In another case, this type of error may arise from mistyping an alphabet for a digit. Take “1” as an example. You can receive this error message when you type “I” instead of “1” or even “O” in place of “0”.

2. Insufficient Balance Or Zero Balance

This type of Footlocker gift card error can be a result of entering the card number wrongly or if your gift card, especially the physical Footlocker gift card, has not been activated after purchase. Also, an error like this may arise from the exposure of the PIN to possible theft of identity whereby scammers have already redeemed the gift card without your prior notice.

3. Technical Errors

You may receive a technical error message when there is a downtime on the Footlocker system network, which prevents you from redeeming your Footlocker at a certain time. This can be a human-induced error but do not worry about that because you are not the cause of this error.

Solutions To Footlocker Gift Card Errors

1. Check The Gift Card Number

You must enter the 16-digit Footlocker gift card number correctly while confirming that the digits are 16 in total. For anyone who may have some eye defect, it is advisable to painstakingly enter the digits without using the place of digits.

Therefore, you may want to check the gift card number again and again to detect possible mistakes in the digits before proceeding to redeem your gift card.

2. Check The Gift Card Balance

Ensure you check your Footlocker gift card balance immediately after redeeming your gift card. This is to confirm the addition of the gift card amount to your Footlocker account. It is possible that the amount of the gift card is not added to your Footlocker account, especially if the Footlocker gift card has already been used by someone.

3. Contact Footlocker Customer Service

You may want to contact Footlocker customer service, which is your last resort in resolving any of your queries. You may contact customer service if errors associated with your Footlocker gift cards persist after checking your gift card number and the card balance.

Footlocker customer service is available via email, phone calls, and chats to tend to the needs of its customers. So you can contact them for possible solutions to the lingering errors on your Footlocker gift card.

4. Troubleshoot Technical Errors

Technical errors are beyond your control as they are directly associated with the Footlocker network. Therefore, you may have to contact the technical support team directly or through an escalation of the issue from customer service to help you in resolving the glitch.

Prevention Tips For Footlocker Gift Card Errors

1. Keep The Gift Card In A Safe Place

Gift cards are known to store real-time value. So they can be likened to holding a sum of money when you have one. As such, it is important to keep your Footlocker gift card safe from the reach of people. You lose money when you lose your gift card. A proper realisation of this fact infers the true worth of the gift card you hold.

2. Register Your Gift Card

Activation precedes the redemption of gift cards. You must activate your Footlocker gift card before you can use the gift card for varying intended purposes. In this instance, you must activate your physical Footlocker gift card immediately at the point of purchase, but the e-gift card is automatically activated before you receive it via your email.

3. Read The Terms And Conditions

You must exhaust the terms and conditions of Footlocker gift cards to give you a broad understanding of how to use the gift card. For instance, it is clearly stated that a Footlocker gift card cannot be used to buy another gift card, and the gift card does not expire.

4. Keep The Receipt

Receipts are evidence of payment for purchases, and this is also applicable to buying a Footlocker gift card. So ensure that you keep the receipt for your gift card as you may need it when an error arises from redeeming your gift card.

When you contact your retailer or Footlocker customer service, you may be required to provide the receipt for the purchase of the gift card, which is to authenticate your ownership of the gift card.

Conclusion

Footlocker gift cards are your ticket to enjoying beautiful and original products in the Footlocker store. But you must be conscious of avoiding any form of error to be able to use your gift card to its best. We are not guaranteeing that the redemption of your Footlocker gift card will be an easy ride, nor do we affirm that it will be a bumpy ride. But being proactive is the best solution.

Therefore, you must treat your Footlocker gift card with a sense of treasure that you will protect and carefully enter the 16-digit card number if you want to redeem it.

When it comes to spelling and grammar mistakes, many people are unsure of the differences between the two of them. In fact, some may confuse the two or mix them up. The reason for this is that the differences between spelling and grammar mistakes may not be that obvious at times. Still, once you look at some examples we will use here to better explain the two, it may help you to distinguish between the both of them more easily.

 

 

Speaking Versus Spelling

 

For most people, it is very easy to speak very well or intelligently. Be that as it may though, whenever you ask the same person to spell what he or she said, they will usually end up making numerous spelling and grammar mistakes. Various words in the dictionary actually sound similar to others. Some words are often spelled differently than what they actually sound like. Silent letters can also cause problems for spellers and end up tripping people in their grammar. Still, while the speaker may not know how to spell either one of them, they will know when to properly use them in a sentence.  

 

Check out this article if you are still unsure how to use There, Their, and They’re

 

Spelling Versus Grammar

 

There are some that may think that when a word is spelled correctly but used incorrectly that it is a spelling mistake. However, that is not the case. Whenever a person intends to use a certain word but ends up using a different one through a spelling mishap, then that becomes a grammar mistake. Most of the time, the words are spelled correctly, however, they are used incorrectly or improperly.

 

One of the most commonly misspelled or misused words are the ‘Your and You’re’ ‘It’s or its’ ‘There, They’re or Their’ combinations. These words are called heterographs since they both sound the same but are spelled differently. Also, using one versus the other incorrectly can alter and change the meaning of the sentence altogether.

 

Here are several examples of words spelled correctly, but wrongly used.

 

Affect, Effect:

 

The drug did not effect the disease so the doctors had to change it.

 

In this sentence we see that the person properly spelled the word effect. However, they should have used affect –  usually a verb meaning to influence. Effect is a noun usually meaning result.

 

Elicit, Illicit:

 

The police were unable to illicit information from one of their informants during the raid.

 

In this sentence we see that the writer used the word illicit incorrectly. While illicit was again spelled correctly, the right word to use should have been elicit.

Elicit is a verb which means to bring out or evoke. However, Illicit refers to an adjective which means unlawful. These two prime examples show us how easy it can be to know how to spell words properly, but end up using them incorrectly in a sentence.

 

You should read Commonly Misused Words – Learn to Use Them Correctly

 

Avoid Making Grammar or Spelling Mistakes

 

One of the best tips you should focus on whenever you are faced with words such as these is to double check them for meaning. Heterographs are very difficult for most students to fully understand right away. Despite this though, with sites like Online SpellCheck or a dictionary, you can actually see the words being used in example sentences to make sure you are using them correctly. Always double check your heterographs and other difficult words which have silent letters, are spelled differently than they sound and contractions. Ultimately, knowing the most common spelling and grammar mistakes can help you tremendously to make sure you avoid making them.

Description

If you like the taste of tobacco then this is definitely a white pouch for you. Made from plant fibers with a natural sweetness of tobacco but of course completely free from tobacco.

FACTS

Net: 12 g (net) 

Flavour: tobacco 

Nicotine: 6 mg/g

Pouch size: slim

Number of pouches: 24

Texture: moist

Available: in single cans, rolls (10 cans)

Manufacturer: AG Snus AB

在北京时间9月14日的报道中，美国媒体公布了一项针对现役未获得NBA总冠军的球员的历史排名。在该排名中，丹佛掘金队的后卫拉塞尔-威斯布鲁克排名第一，紧随其后的是克里斯-保罗，而詹姆斯-哈登位列第三位。具体排名细节如下：

1、拉塞尔-威斯布鲁克

2、克里斯-保罗

3、詹姆斯-哈登

4、达米恩-利拉德

5、卢卡-东契奇

6、乔尔-恩比德

7、保罗-乔治

8、吉米-巴特勒

9、德玛尔-德罗赞

10、德文-布克

11、多诺万-米切尔

12、特雷-杨

The enticing, fun, and cute cat toy is perfect for Mad Cat Sloth A Cado Cat Toy – 2 Pack!

• Sloth and avocado plush
• Blended catnip & silvervine filled
• 2 Pack

Why We Love It:

The fun Mad Cat Sloth A Cado Cat Toy – 2 Pack brings fun to your curious cat! Filled with a custom blend of tempting catnip and silvervine for twice the cat attractants, plus fun crinkle for enticing sound. Silvervine is an all-natural catnip alternative that cats love, it elicits a similar reaction to catnip, and works for many cats who normally are not affected by catnip. Its high quality materials and catnip/silvervine blend are pure, pesticide free, high potency!

（Zenith 844 Paving Block Machine）

Worldwide the best in economical concept for the mass production of interlocking pavers and similar products of top quality. 

Model 844 is a fully automatic, stationary multilayer machine. The result of decades of research using the most modern technology. Performance at a high level with simple handling and very low maintenance. The innovative Touch-Operator-Panel, using a revolutionary visualized menu navigation, allows easy and self-explanatory operation of all machine functions.

Products Storage

    50MPA Pavers

Delivery of Products

 

I love a good poncho or a cape so falling in love with a cloak is not a far fetched idea. With a good month or more still left in this winter you are probably tiring of all those jackets you have been wearing over and over again. Let's break that boredom by bringing in a cloak.

Yesterday I took a client out and introduced her to a solid blue, soft Michael Kors cloak she never would have picked out for herself. But the minute we threw it on her over her new legging pants she could not live without it. In fact even though we got numerous new items from dresses to tops to pants and jackets, the first outfit she wore after her wardrobe makeover involved the cloak.

For the chic and smart look, the Michael Kors cloak is the way to  go (Couldn't find a picture of it, but is available at Nordstroms). But for those looking for a little oomph via pattern, browse Bona Drag.com; a website with a focus on independent designers. On this site you will discover these Lindsey Thornburg cloaks. Gotta love that hood option. Wear it by itself with tights or pair with leggings, cigarette pants or slim leg jeans. You will be warm and stylish for the beginning of 2010.

Deburring is a machining or finishing process used to remove sharp edges, burrs, or unwanted material from the surface of a workpiece giving it a polished and finished look. In this article, we will help you understand what is deburring, deburring tools, and how to use a deburring tool to remove sharp edges from your workpieces.

 

 

 

 

 

 

What Is A Burr?

Burrs are small, often sharp metal or plastic protrusions that can occur during various manufacturing processes, such as cutting, drilling, milling, or stamping. These burrs can be undesirable for several reasons including safety, functionality, and aesthetics. For safety purposes, burrs can be sharp and pose a safety hazard to workers handling the parts. In precision engineering, burrs can affect the functionality of a part or interfere with the assembly of mechanical components. Lastly, for aesthetics, in applications where appearance is important, such as in the automotive or aerospace industries, burrs can detract from the overall quality and finish of a product.

With this information, let’s dive deeper into what is deburring and how to use a deburring tool to remove sharp edges on your workpieces.

How To Remove Burrs From Metals and Materials

CNC machines offer precision and repeatability. These components make CNC machines ideal for industries where high-quality finishes and rigid tolerances are essential, such as aerospace and medical device manufacturing. Here’s a general guide on how to remove burrs from metals and materials using a CNC machine keeping in mind that each project may have its own unique needs.

First, select the appropriate tool based on the material and the type of burrs you need to remove. Common tools include end mills, countersinks, and deburring cutters. The choice of tool will depend on factors like the material’s hardness, burr size, and the desired finish. DATRON offers quality carbide tools that are German engineered for precision, performance, and extended tool life, which is perfect for deburring projects, but we will cover more on tools later in the article.

Next, you will need to program the CNC machine. Load your workpiece into the machine’s workholding system, ensuring it is securely fixed. Create a CNC program that specifies the toolpath for deburring including information about the tool’s speed, feed rate, depth of cut, and toolpath strategy. Use CAM software to generate the toolpath if you’re not manually programming the CNC machine.

The choice of toolpath strategy depends on the geometry of your workpiece and the location of burrs. Common strategies include contouring, chamfering, and face milling. Ensure that the toolpath covers all areas with burrs, and that the tool approaches the workpiece at the correct angles to remove the burrs effectively. Set the appropriate cutting speed (RPM) and feed rate (inches per minute or millimeters per minute) for the chosen tool and material. Be sure to regularly inspect the cutting tool for signs of wear and replace it as needed to maintain the quality of the operation.

The last step is to begin running the CNC machine and closely monitor the operation to ensure that the burrs are being effectively removed. After deburring, inspect the workpiece to verify that all burrs have been removed to the desired level and make any necessary adjustments to the CNC program if burrs remain.
Now that you know how to remove burrs, it is important to know what a deburring tool is and how to use a deburring tool properly in different applications.

What Is A Deburring Tool?

A deburring tool is designed specifically for removing burrs and sharp edges from the surface of a workpiece. These tools come in various shapes and sizes, and the choice of tool depends on the type of workpiece and the specific deburring requirements. The tool also depends on the size and location of the burrs, and the desired finish quality.

Here are some common types of deburring tools used with CNC machines:

Countersinks and Chamfering Tools: Countersinks and chamfering tools are used to create beveled edges or chamfers on holes or edges. This not only removes burrs but also improves the edge’s finish and functionality.

Deburring Cutters: These cutters are specialized tools designed specifically for deburring applications. They often feature a high number of flutes that are optimized for burr removal.

Deburring Brushes: Deburring brushes are rotary tools equipped with abrasive bristles. They are effective for removing burrs and achieving a uniform finish, especially on curved or irregular surfaces.

CNC-Mounted Deburring Tools: Some CNC machines are equipped with deburring toolholders that can accommodate various inserts or blades. These tools are often programmable, allowing for automation within the CNC machining process.

You know what tools are needed, now it’s time to know how to use a deburring tool taking into consideration the material you are removing, the burr type, toolholder compatibility, and the CNC machine being used.

How To Use A Deburring Tool

Once you know what tools to use, here is how to use a deburring tool depending on the part you are trying to make. It’s important to remember that deburring different materials on a CNC machine requires consideration of the unique properties of each material and tailoring your approach accordingly.

Here are some guidelines for deburring common materials like metals, plastics, and composites on a CNC machine and how to use the tools accordingly.

Deburring Metals

When deburring metals such as steel, aluminum, or brass, choose a high-speed steel or carbide tool designed for metalworking. Use contouring toolpaths for flat surfaces, chamfering toolpaths for edges, and spot-drilling toolpaths for holes. Be sure to adjust the toolpath to avoid overheating, especially when working with aluminum. You can do this by controlling the feed rate and depth of the cut. Determine the appropriate cutting speed (RPM), feed rate (inches per minute or millimeters per minute), and depth of cut based on the material and tool specifications and be sure to use lubrication or coolant to reduce heat buildup and improve tool life.

Deburring Plastic

When deburring plastics such as acrylic, nylon, and Delrin, select high-quality, sharp tools suitable for plastics to avoid melting or smearing. Consider a single-flute or two-flute end mill for efficient chip evacuation. Use contouring toolpaths for removing burrs on flat surfaces and edges. Be cautious with aggressive toolpaths to prevent melting or distortion of plastic. Your cutting parameters should be set at a lower cutting speed than those used for metals to minimize heat generation. You can also reduce the depth of cut to prevent excessive material removal and melting. Cooling may not be necessary for plastic deburring, but it can be helpful in some cases. Ensure that the coolant or cutting fluid is compatible with the plastic material.

Deburring Composites

Before deburring composites such as carbon fiber reinforced plastics, always consult material-specific guidelines and consider conducting test runs with scrap pieces to optimize the deburring process for each material type. Additionally, safety precautions and appropriate personal protective equipment (PPE) should be observed when working with CNC machines and materials.

Other Factors to Consider

There are other factors to consider that will impact how you use a tool. An example of this is the burr type you are looking to remove. Different tools are better suited for different types of burrs, such as edge burrs, which refers to a small, unwanted protrusion or irregularity along the edge of a workpiece. Some other types of burrs include rollover or exit burrs, tear burrs, and a cut-off (or breakout burr) to name a few.

Another aspect one must consider is the toolholder compatibility of their machine. It is important to verify that the tool is compatible with the toolholder and spindle of your CNC machine. The same concept goes for the shape and the size of the burr you want to achieve, and the size of the tool being used. Choose a tool that matches your deburring needs and is compatible with the machine you are using.

Lastly, tool coating is another part of this process that needs to be considered. Some deburring tools come with coatings or treatments that enhance durability and performance. These coatings provide a protective layer that can improve cutting efficiency, reduce friction, increase tool life, and minimize wear. Different coatings are suitable for specific materials and machining conditions.

Start Your Deburring Journey Today!

We have covered what deburring is and how to use a deburring tool in this article – now it’s time to begin your project! But do you know who can help you get started on your milling journey?

Here at DATRON, we’re the milling experts, and we’re here to help everyone from complete novices to master machinists. Ready to get your milling project started? All you have to do is contact us today!